Le routeur 5G Teltonika RUTX50 est une matériel de communication industriel de dernière génération qui permet un accès au réseau mobile 5G pour des communications haute-vitesse et des applications industrielles lourdes.
La communication offerte par la double carte SIM 5G associée aux 5 ports Ethernet gigabit 10/100/1000 Mbs et le point d'accès WIFI5 embarqué permettent des comunications avec un temps de latence réduit au minimum.
La puissance de le technologie 5G, combinée avec une large gamme d'interfaces matérielles adaptée à l'industrie et logicielles promettent une adaptation performante aux futures extensions et mises à jour.
Le routeur 5G RUTX50 embarque le système d'exploitation RutOS qui procure des fonctionnalités de sécurité avancées et le support de protocoles industriels spécialisés pour une large gamme de possibilités de déploiements possibles.
Il est compatible avec le système de management à distance Remote Management System (RMS), pour un management optimisé et un monitoring d'une largfe flotte d'équipements disséminés.
Interfaces physiques du routeur industriel 5G RUTX50 :
- 5 x RJ45 Gigabit Ethernet
- WLAN 2,4 GHz jusqu'à 867 Mb/s.
- 1 entrée numérique
- 1 sortie numérique sur connecteur d'alimentation 4 broches
- 2x emplacements SIM (mini SIM - 2FF)
- 1 x connecteur d'alimentation c.c. à 4 broches
- 4x SMA pour radiocommunication mobile
- 2x RP-SMA pour WLAN
- 1x SMA pour GNSS
- 1 port USB-A pour appareils externes
- 1 vis de mise à la terre
5G : Vitesses de téléphonie mobile ultra-élevées jusqu'à 3,3 Gb/s.
SA & NSA : Prend en charge les deux architectures pour optimiser la connexion à l'infrastructure 5G
Temps de latence ultra-faible : Temps de latence à un chiffre pour les applications stratégiques
Deux cartes SIM : Communication sans interruption avec basculement automatique
Wi-Fi 5 : Débit de données double bande avec un support de 150 clients simultanés
Contenu de l'emballage :
- Routeur RUTX50
- Bloc d'alimentation 18 W.
- 4 x antennes mobiles (basculable, prise SMA)
- 2 antennes WLAN (fixation magnétique, prise RP-SMA, câble de 1,5 m)
- 1 x antenne GNSS (autocollant, fiche SMA, câble de 3 m)
- Câble Ethernet (1,5 m)
- Kit d'adaptateur SIM
- QSG (guide de démarrage rapide) / Flyer RMS
Détail des fonctionnalités matérielles et logicielles :
Mobile module |
5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL |
Status |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. |
SMS/Call |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities |
USSD |
Supports sending and reading Unstructured Supplementary Service Data messages |
Black/White list |
Operator black/white list |
Band management |
Band lock, Used band status display |
APN |
Auto APN |
Bridge mode |
Direct connection (bridge) between mobile ISP and device on LAN |
Passthrough |
Gateway assigns its mobile WAN IP address to another device on LAN |
Multiple PDN |
Possibility to use different PDNs for multiple network access and services |
Wireless mode |
802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) |
WiFi security |
WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
ESSID |
ESSID stealth mode |
WiFi users |
Up to 150 simultaneous connections |
Wireless Hotspot |
Captive portal (Hotspot), internal/external Radius server, built-in customizable landing page |
Wireless mesh/roaming |
Wireless mesh (802.11s), fast roaming (802.11r) |
WAN |
1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
LAN |
4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover |
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) |
Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
Connection monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall |
Port forwards, traffic rules, custom rules |
DHCP |
Static and dynamic IP allocation |
DDNS |
Supported >25 service providers, others can be configured manually |
SSHFS |
Possibility to mount remote file system via SSH protocol |
Authentication |
Pre-shared key, digital certificates, X.509 certificates |
Firewall |
Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T |
Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
VLAN |
Port and tag-based VLAN separation |
Mobile quota control |
Set up custom data limits for SIM card |
WEB filter |
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
OpenVPN |
Multiple clients and a server can run simultaneously, 12 encryption methods |
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
GRE tunnel |
GRE Tunnel |
IPsec |
IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
SSTP |
SSTP client instance support |
STUNNEL |
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
DMVPN |
Method of building scalable IPsec VPNs |
PPTP, L2TP |
Client/Server services can run simultaneously, L2TPv3 support |
WireGuard |
WireGuard VPN client and server support |
ZeroTier |
ZeroTier VPN |
ID filtering |
Respond to one ID in range [1;255] or any |
Allow remote access |
Allow access through WAN |
Custom registers |
MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality |
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
Gateway |
Allows sending commands and receiving data from MODBUS Master through the MQTT broker |
Supported modes |
TCP Master, DNP3 Outstation |
Protocols |
HTTP(S), MQTT, Azure MQTT, Kinesis |
Clouds of things |
Allows monitoring of: Device data, Mobile data, Network info, Availability |
ThingWorx |
Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
Cumulocity |
Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
Azure IoT Hub |
Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
FOTA |
Firmware update from server, automatic notification |
SSH |
SSH (v1, v2) |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
CALL |
Reboot, Status, Mobile data on/off, Output on/off |
TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
MQTT |
MQTT Broker, MQTT publisher |
SNMP |
SNMP (v1, v2, v3), SNMP trap |
JSON-RPC |
Management API over HTTP/HTTPS |
MODBUS |
MODBUS TCP status/control |
RMS |
Teltonika Remote Management System (RMS) |
CPU |
Quad-core ARM Cortex A7, 717 MHz |
RAM |
256 MB (100 MB available for userspace) |
FLASH storage |
256 MB (80 MB available for userspace) |
WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup |
FOTA |
Update FW |
RMS |
Update FW/configuration for multiple devices at once |
Keep settings |
Update FW without losing current configuration |
Operating system |
RutOS (OpenWrt based Linux OS) |
Supported languages |
Busybox shell, Lua, C, C++ |
Development tools |
SDK package with build environment provided |
GNSS |
GPS, GLONASS, BeiDou, Galileo and QZSS |
Coordinates |
GNSS coordinates via WebUI, SMS, TAVL, RMS |
NMEA |
NMEA 0183 |
Server software |
Supports server software: TAVL, RMS |
Geofencing |
Multiple configurable geofence zones |
Data rate |
USB 2.0 |
Applications |
Samba share, USB-to-serial, Modbus gateway |
External devices |
Possibility to connect external HDD, flash drive, additional modem, printer |
Storage formats |
FAT, FAT32, NTFS |
Input |
1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high |
Output |
1 x Digital Output, Open collector output, max output 30 V, 300 mA |
Events |
SMS, Email, RMS |
I/O juggler |
Allows setting certain I/O conditions to initiate event |
Connector |
4-pin industrial DC power socket |
Input voltage range |
9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max |
PoE (passive) |
Mode B, LAN1 Port, 9 - 50 VDC |
Power consumption |
Idle: <4 W, Max: <18 W |
Ethernet |
5 x RJ45 ports, 10/100/1000 Mbps |
I/Os |
1 x Digital Input, 1 x Digital Output on 4-pin power connector |
Status LEDs |
3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs |
SIM |
2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V |
Power |
1 x 4-pin DC power connector |
Antennas |
4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS |
USB |
1 x USB A port for external devices |
Reset |
Reboot/User default reset/Factory reset button |
Other |
1 x Grounding screw |
Casing material |
Aluminum housing |
Dimensions (W x H x D) |
132 x 44.2 x 95.1 mm |
Weight |
533 g |
Mounting options |
DIN rail (can be mounted on two sides), flat surface placement |
Operating temperature |
-40 °C to 75 °C |
Operating humidity |
10 % to 90 % non-condensing |
Ingress Protection Rating |
IP30 |